Moje konto
Twoje konto
Konto użytkownika ułatwia zakupy - możliwe jest m.in. śledzenie postępu realizacji zamówienia oraz zapamiętanie adresu wysyłki.
Koszyk
Koszyk jest pusty
Kategorie: , ,

SONIFEX RB-DEED8 Dolby®

26.172,85 

Dostępny 2-7 dni Darmowa dostawa!
Produktu nie mamy na magazynie ale zamówimy go dla Ciebie u dostawcy. W ciągu 2-7 dni roboczych produkt zostanie wysłany. Często okres ten może być krótszy, niestety nie mamy wpływu na dostawy i wydarzenia losowe.
Negocjuj cenę

Opis produktu

The RB-DEED8 is a Dolby® E Encoder. It encodes up to 8 digital audio channels into a single Dolby bitstream output. There is also an extra Dolby output for connection to monitoring equipment.

Each digital input channel has independent level control, which can be adjusted from -24dB through to +24dB in 0.5dB steps. The digital inputs and outputs can be selected to be either balanced or unbalanced AES/EBU specification, and can be connected through either BNC or D-type connectors. These I/O connections are paralleled, allowing one type to be used per input or output.

Metadata can be input to the encoder using RS-485 via the external 9-pin D-type socket on the rear panel and can also be viewed using the SCi software. 

A video input is used to genlock the audio output and Dolby® E encoding to a known video reference. This input autodetects between NTSC, PAL or Tri-level sync.

8 general purposes inputs and 8 outputs are available on a rear panel 25 way D-type socket whose function can be programmed using the menu, e.g. alarm outputs for loss of input or encoder errors.

The unit is controlled locally using the front panel display and control knob but can be remote controlled via an ethernet connection using the Sonifex SCi software.

RB-DEED8 Diagram

Dolby Embedder, Unbalanced Input Grounding

The Redbox Dolby® Encoder products use differential inputs that can be terminated with either 75Ω or 110Ω for unbalanced or balanced inputs, respectively.

For unbalanced inputs, all that should be required is to set the inputs to 75Ω. However it has been found in rare circumstances that in this case there are issues with grounding when the input is connected from other manufacturers’ products.

Should problems of this nature occur, internal ground link jumpers have been provided on the RB-AIM-DE sub-board PCB to correct the problem. These short to ground one of the differential inputs, effectively providing a ‘true’ unbalanced connection.

It's also possible to do the same for the digital output using link J6.

The jumpers are labelled as follows:

I/O Type Ground Link Reference
Inputs 1 and 2 J2
Inputs 3 and 4 J3
Inputs 5 and 6 J4
Inputs 7 and 8 J5
Digital Output J6

AIM Sub-board

AIM Sub-board.

SCi logoThis product has settings that can be adjusted using the Sonifex SCi (Serial Control Interface) software. To download a copy of the SCi software, please use this link >

Dolby® and the double-D symbol are registered trademarks of Dolby Laboratories

SCi Screens

Sci image - RB-DEED8 System Screen

System Screen.

Sci image - RB-DEED8 Audio I/O Screen

Audio I/O Screen.

Sci image - RB-DEED8 Encoder/Control Screen

Encoder/Control Screen.

Sci image - RB-DEED8 Encoder/Metadata Screen

Encoder/Metadata Screen.

Sci image - RB-DEED8 Encoder/Metadata Status Screen

Encoder/Metadata Status Screen.

Sci image - RB-DEED8 Level Control Screen

Level Control Screen.

Sci image - RB-DEED8 Remotes Screen

Remotes Screen.

Technical Specification For RB-DEED8

Output Sample Rate: 48kHz
Input Sample Rates: CH1/2 & CH3/4: 32-192kHz
CH5/6 & CH7/8: 32-48kHz
Input & Output Impedance: 75Ω/110Ω selectable
Signal Level(un-terminated): Unbalanced: 1Vp-p +/- 20%
Balanced: 6.6Vp-p +/- 20%
Digital Audio I/O: 
Inputs:
8 input channels via 4 x BNCs or
25 way D-type socket (AES3)
Dolby Output 1: 1 x Dolby bitstream output via BNC
Dolby Output 2: 1 x Dolby bitstream output via BNC or 25 way D-type socket (AES3)
Digital Audio Connectors: 6 x BNC
1 x 25-way D-type socket
Metadata: SMPTE-RDD06, 9 way D-type socket
 

Video Reference

Reference Type: Autodetect NTSC, PAL or Tri-level sync
Impedance: 75Ω
Connector: 1 x BNC
LTC Input: 1 x BNC (not used)
 

Operational Control

Display: Vacuum fluorescent display
System Navigation: Rotary selector with integral push-switch
   

Additional Connections

Ethernet Port: 10/100Mbps, RJ-45
Remote 25-way ‘D’-type socket
Input/Output Port:Serial Port: RS232, 9 way D-type
Power Supply: Universal filtered IEC, continuously rated 85-264VAC @47-63Hz, fused
Fuse Rating: Anti-surge fuse 1A 20 x 5mm
 

Zapytaj naszego eksperta

Dawid Bara

Specjalista ds. sprzedaży, system ratalny

795 169 656 [email protected]

    Zostaw numer telefonu lub email, skontaktujemy się z Tobą jak najszybciej.

      Zostaw numer telefonu lub email, skontaktujemy się z Tobą jak najszybciej.

      Zapisz się do newslettera!

        Ta strona wykorzystuje pliki cookies w celach statystycznych i reklamowych oraz w celu dostosowania naszych serwisów do indywidualnych potrzeb klientów. Zmiany ustawień dotyczących plików cookie można dokonać w dowolnej chwili modyfikując ustawienia przeglądarki. Korzystanie z naszej strony bez zmiany ustawień dotyczących cookies oznacza, że będą one zapisane w pamięci urządzenia.